Roll over to enlarge

This image is for illustrative purposes only

Rawlplug M20 x 175mm Glass Capsule - Epoxy Acrylate - Resin Anchor (Pack of 6)



For use with resin studs.

Drill into the wall/concrete etc.. clean out hole and insert capsule. spin in stud using setting tool in a hammer drill and allow to cure. Item being fixed can then be placed over stud, fit the nut & washer and tighten. Job done!


Drill a 22mm hole in the wall/concrete etc.

Setting Times

Base Material Temperature - Curing Time Dry - Curing Time Wet
20 degrees C - D 30 mins - W 1 hour
11-20 degrees C - D 1 hour - W 2 hours
6-10 degrees C - D 3 hours - W 6 hours
1-5 degrees C - D 6 hours - W 12 hours
-5-0 degrees C - D 15 hours - W 30 hours

Supplied complete with

Boxed in 6's

Ideal for:
Safety critical applications into concrete, hard stone & situations where the lack of expansion stress is essential (ie. close to the edge fixings)
Examples include stuctural connections to columns and beams, holding down bolts for light structures, machinery, pumps, fans etc.

In Stock - Unless otherwise noted in the product description


(£7.97 ex VAT)


Accessories & Related Products

Anchors > For Masonry & Concrete - Resin Anchors > Threaded Studs - with BZP Finish - For use with Chemical Capsules and Resins