Rawlplug M30 x 265mm Glass Capsule - Epoxy Acrylate - Resin Anchor (Pack of 6)
For use with resin studs.
Drill into the wall/concrete etc.. clean out hole and insert capsule. spin in stud using setting tool in a hammer drill and allow to cure. Item being fixed can then be placed over stud, fit the nut & washer and tighten. Job done!
Drill a 33mm hole in the wall/concrete etc.
Base Material Temperature - Curing Time Dry - Curing Time Wet
20 degrees C - D 30 mins - W 1 hour
11-20 degrees C - D 1 hour - W 2 hours
6-10 degrees C - D 3 hours - W 6 hours
1-5 degrees C - D 6 hours - W 12 hours
-5-0 degrees C - D 15 hours - W 30 hours
Supplied complete with
Boxed in 6's