Specification

EY7540 Impact Driver
- Three Levels of impact power
- Compact Size at only 6-1 /2" length
- Light weight weighing in a little over 3 lbs.
- High power with up 1,330 in. lbs. of torque
- Adjustable torque levels for a clean finish
- Brush less Motor ensures longer tool life
- Improved Ergonomic design to reduce fatigue
- Built in LED Light illuminates work area
- Electronic Performance Monitoring System
- Torque High Power: up to 1330 Inch-Pounds
- No Load Speed High /Hard Mode: 0-2,300 RPM
- No Load Speed Medium Mode: 0-1,400 RPM
- No Load Speed Low /Soft Mode: 0-1,000 RPM
- Chuck: 1 /4 Inch
- Chuck Type: Hex quick connect
- Reversible: Yes
- Electric Brake: Yes

EY7940 Hammer Combi Drill Driver - 14.4V Li-Ion Hammer Drill & Driver from Panasonic ToughIP series
- IP56 rated for superior dust and water resistance
- Compact and lightweight (7-7 /8", 3.86 lbs) reduces strain during use
- Equipped with 18-stage clutch plus drill position
- Variable speed control is also reversible
- 2-speed gear box
- 1 /2" heavy-duty key-less chuck
- Electric brake
- LED work light illuminates dark work spaces
- Quick charging battery charges in as little as 35 min
- Max. Torque (Nm): Instant torque 44.1 / Stalling torque 31.9
- Speed at No Load (rpm): Low 70 - 400 / High 200 - 1400
- Clutch Stages: 18 + Drill + Hammerdrill position
- Chuck Size:13mm
- Blows Per Minute: Low 7500 / High 27000
- Typical Application: General construction / Joiners / carpenters / Steel / Metal / Installation / Electricians / Plumbing / Maintenance
- Width: 60mm
- Height: 225mm
- Length: 200mm
- Weight (incl. battery): 1.75kg